Project photo 1Brand new garage door bottom sealBrand new roller.Brand new drum cable and plateHold bottom seal. We're also replaying replacing the, retainer and the bottom seal.Fresh.Brand new electrophoretic high cycle life torsion spring.ProTool SureWinder used to wind up the springs. Normally, you would use a winding barge, but professionals use the SureWinder.So good. Brand new end plate, bearing, spring, and roller picture.New sensor in the correct position with beautiful wiring.Project photo 11Project photo 12Project photo 13Project photo 14Project photo 15Project photo 16Project photo 17Project photo 18New wall button installed. Straight wiring.Old sensor too high, messy wiring.Warbutton.Project photo 22