Project photo 1Project photo 2Project photo 3Brand new rollersHigh cycle like, high cycle life. Electrophoretic torsion springs.A beautiful installation of a wall mount ROJ garage door opener from LiftMaster.Insolve.Project photo 8Project photo 9Project photo 10Project photo 11Project photo 1298022 getting installed.Track hanger should be rebuilt as the attachment style is not solid and looks bad.
Should be attached to the ceiling not the beam.Additionally, if springs are over three years old, it's recommended to change them due to negation of labor at a later date since labor is already being paid to take apart the torsion system if you choose to do so.Notice the black ring of death on the endplate. Bearing signifies that the bearing has been freezing while operation is happening, which means the bearing should be replaced for optimal operation within RJO.Tracks are currently set to dead level for optimal operation with a jackshaft motor. The door need or the tracks need to be set at just above level. So, basically, going up in the back. That way, the door has some brow or downforce when it's in the up position.Project photo 18Older roller is old and worn out, should be replaced. When installing a jack shaft, it's very important that the door rolls freely and clearly. So the operator can so the opener can operate correctly.Project photo 20